Cleaning Instructions - Waring Commercial WMO120 Manual Del Usuario

3. If the oven is not in the factory-default setting, the screen will
display 00. Press START to return to the factory-default setting.
The screen will display CLEAR. NOTE: If you do not press
START when 00 is displayed, the oven will not return to the
factory-default setting.
WARNING: Please note that changing back to the factory-default
setting will erase all user-programmed information.

CLEANING INSTRUCTIONS

Always keep the oven clean.
1. Cleaning the glass viewing window, the inner door panel
and oven front face: For best performance and to maintain
a high degree of safety, the inner door panel and oven front
face should be free of food or grease buildup. Wipe these
parts with a mild detergent, rinse and wipe dry. Never use
abrasive powders or pads.
2. Cleaning the control panel and plastic parts: Do not apply
a detergent or an alkaline liquid spray to the control panel
and plastic parts, as this may cause damage to these parts.
Use a dry cloth (not a soaked cloth) to clean these parts.
3. Cleaning the oven interior: After use, be sure to clean up
spilled liquids, spattered oil and food debris as quickly as
possible. If the oven is used when dirty, efficiency drops and
the dirt gets stuck on the oven surface and may cause bad
odors. Clean the interior with a cloth soaked in lukewarm
water with a mild detergent dissolved in it, then rinse the
soap off with a damp cloth.
CAUTION: Do not wipe plastic and painted sections of the oven with
bleach, thinners or other cleaning agents, as this may cause these
parts to dissolve or change shape.
18