Comelit 8185I Manual Tecnico página 13

Warning:
third parties for any reason or purpose, and for the use of accessories and materials which are not originals.
recommend modifying the installation height of the camera, which is usually 160 - 165 cm, to a height of 180 cm and pointing the lens downward so as
to improve filming quality.
environments, that an additional light source is installed.
General information
External unit
Art. 4879KC
Art. 1207
Installing the external unit
Inserting nameplates
Internal units
Art. 5702
Art. 5714KC
Installing Art. 5702 as a flush- or wall-mounted device
Installing optional card Art. 5733, Art. 5734
Art. 2608
Installing door-entry phone Art. 2608
General installation and operating instructions
Operating distances table
Operation
Description of button functions and settings
Settings for bracket Art. 5714KC and Style door-entry phone Art. 2608
Setting bracket Art. 5714KC as main or secondary
Additional main or secondary monitors
Selecting the monitor ringtone
Using the kit in systems with a main entrance
Programming buttons on Art. 4680KC
Special programming - Art. 4680KC
Wiring diagrams
BK/018IC Basic diagram for two-family kits Art. 8185I with cascade connection. Switching on/voltage check with system in standby.
BK/013IBC Basic diagram for two-family kits Art. 8185I with branch connection
BK/014IBC Diagram for two-family kits Art. 8185I extended with a second Art. 4879KC. Branch connection.
BK/014I/AC Diagram for two-family kits Art. 8185I extended with a second Art. 4879KC. Cascade connection.
BK/018I/AC Diagram for two-family kit with additional power supply unit Art. 1595
BK/019IC Use of remote camera module Art. 1259C
BK/EN/109IC Diagram for connecting 2 to 9 Bravo Kits to main entrance panel using Art. 4834/9
BK/EN/110IC Diagram for connecting 30 Bravo Kits (maximum) to the main entrance panel. Cascade connection of Bravo using Art. 1424
SB2/AAR Connection of video amplifier Art. 4833C
BK/HIC Addition of a main monitor in parallel. Cascade connection
BK/IIC Addition of a main monitor in parallel. Branch connection
BK/A9C Branch connection of 1 main monitor and 1 secondary monitor with the same user code
BK/CIC Cascade connection of 1 main monitor and 1 secondary monitor with the same user code
BKC/AABI Connection of additional door-entry phones with branch connection from monitor
BKC/AAAI Connection of additional door-entry phones with cascade connection from monitor
BK/FIC Addition of a parallel door-entry phone, with branch connection from riser
PXK/AAK Connection of call repetition devices (Art. 1229 or Art. 1122/A)
BK/PIC Use for various purposes of button P1 (Art. 5714KC)
BK/NIC Use of LED 1
SB/X3 Use for various purposes of button P1 (Art. 2608)
Floor door call connection variant
PXK/EC Connecting actuator relay Art. 1256
PXK/RTNP Using the external unit relay on lock-release or actuator control (see special programming, page 23: actuator control management)
PXK/SNP Variant with security door lock and additional power supply
Using the RC network for door lock filter on relay contacts
PXK/DO Door open indication use variant.
Only for use in systems with a single external unit without switching devices Art. 1224A, Art. 1424.
Comelit Group S.p.A. declines any responsibility for improper use of the apparatus, for modifications made by
CE mark they carry.
14
14
14
14
15
16
16
17
17
18
18
19
19
19
20
20
21
21
21
22
22
23
82
83
84
85
86
87
88
90
92
92
93
93
94
94
95
95
96
97
97
97
98
98
99
99
100
100
13 13