EnviroBoss EB60 Manual Del Propietário página 4

USER SETTINGS
Only menu items followed by a greater-than symbol (>) may be adjusted. If no keys are selected for 5 minutes on screens: INLET OUT-
LET, GRAIN DPR, the display will return to normal display mode. In all the other menu items, the display with return to the normal dis-
play mode after 20 seconds. Items without the symbol (>) are for information only and cannot be changed or reset.
Press DISPLAY
MENU to proceed to
the next menu item. ↓
1. JOB HRS RESET >
>
PWR INTERRUPT X
2. INLET OUTLET For information only.
100' 80% 115' 30%
3. GRAIN DPR Note: Unit displays GPP if set to Fahrenheit or g/kg if set to Celsius. To change this setting, see menu item 9.
XX GPP
4. FILTER CHECKED >
XXX HRS >
5. COIL CLEANED >
XXX HRS >
6. HUMIDISTAT >
MODE OFF >
7. HUMIDISTAT >
SETPOINT XX% >
8. LANGUAGE >
ENGLISH >
9. TEMP UNITS >
'F >
10. COIL TEMP For information only.
XX'
11. COMP CURRENT For information only.
XX.X A
12. FIRMWARE For information only.
3.0X FXXX-XXX
13. LIFE HOURS
XXXX HRS
(Returns to
top menu item.)
The following section available only on wireless-equipped units.
14. SENSOR ID
XXXXXXXX
(Returns to
top menu item.)
07-02330B EB60
Press MENU SELECTION to change the setting.
1. JOB HR RESET 0 Press > to reset to 0.
PWR INTERRUPT 0
5. FILTER CHECKED Press > to clear filter hours.
0 HRS
5. COIL CLEANED Press > to clear coil hours.
0 HRS
6. HUMIDISTAT Press > to turn ON or OFF. For maximum dehumidification, make sure
MODE ON > HUMIDISTAT is OFF.
Press > to cycle through 40%–90% at 5% increments (default is 50%).
8. IDIOMA >
ESPANOL >
9. TEMP UNITS Press > to change to °F or °C.
'C >
→
8. SPRACHE > 8. LANGUE
DEUTSCH > FRANCAIS >
4
Press > to change lan-
guage options.
EnviroBoss