Spare Parts; Technical Data - Hansgrohe Allegra Linea 14807 Serie Manual De Instrucciones

Assembly
1. Flush through the supply pipes.
2. Place the mixer including the sealing washer in
position on the sink.
3. Slip the plastic washer, the slide washer, the
metall washer and collar nut over the hose and
threaded base and tighten the collar nut by
hand. If there is not enough space, please use
only the slide washer and the metall without the
4. Tighten screws.
5. Connect the connecting hose to the angle
valves; cold right - hot left.
6. Connect the hose with hose nut, taper sleeve,
disc and washer.
Large differences in pressure between the hot and
cold water supply should be balanced.
Operation
The mixer is actuated by lifting the lever head.
Swivel to the left = hot water, swivel to the right =
cold water.
The handspray can be drawn approx. 50 cm out of
the arm lining. The spray mode is changed to
showerspray by pressing the front button
top of the sprayhead. By pressing the rear button
or switching off the water, the spray mode changes
to aerated spray.

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temperature:
Rate of flow by 3 bars aerated spray:
Rate of flow by 3 bars shower spray:
Test certificate:
hot water limiter:
back flow and vacuum breaker
English
Hansgrohe single lever mixers can be used together
with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 1.5 bars.

Spare parts

1
1.1 screw cover
2
3
4
5
6
7
8
9
10
11
12
XXX = Colors
000 chrome plated
090 chrome plated/gold plated
440 brown
450 white
on the
610 black
max. 10 bars
1 - 5 bars
16 bars
max. 80° C
65° C
11 l/min
12 l/min
WRAS
order separatly
handle
flange
nut
cartridge cpl.
service set
seals (5)
mixer ball
hose
handspray
aerator cpl.
fixation cpl.
flexible tail 600 mm
14891XXX
94186000
95046XXX
94106000
14095000
13952000
13962000
13964000
95048000
14893XXX
13085000
95049000
95050000