Publicidad
Idiomas disponibles
Idiomas disponibles
Removing the tripod mount and attaching
the decoration ring
Removing the tripod mount:
Turn the knob of the tripod mount to the left to
loosen it 1. Turn the tripod mount to the left,
align it with the mark 2, and remove it from the
lens body 3.
Attaching the decoration ring:
Align the marks and insert the decoration ring 1,
then turn it to the right until it stops (until you hear
it snap) 2.
How to use the lens hood
Pull it outward until it stops 1, and then turn it
to the right 2.
The lens hood cannot be removed from the lens.
Notes on Shooting
• Edges of pictures may be cut off if more than
one filter is used or if a thick filter is used.
• When using a flash, flash light may be blocked
by the lens body, lens hood, etc.
• The focus distance may change when the
focusing method is switched from MF to AF/MF
and then back to MF. Readjust the focus distance.
• The distance indicator is intended as a guide only.
8
EN
• Usage conditions may lower the number of
images that can be captured.
• Do not hold only the camera body without
holding the lens. The waterproofing
characteristic or optical performance may not
be maintained.
Main Specifications
Mount
Focal distance
Max. aperture
Image angle
Lens configuration : 10 groups, 17 lenses
Iris control
Shooting range
Focus adjustment : AF/MF switching
Weight
Dimensions
Lens hood
Filter mount thread diameter : Ø 77 mm (3.0 in.)
Can be used with the MC-14
: Micro Four Thirds mount
: 300 mm (equivalent to 600
mm on a 35 mm camera)
: f4.0
: 4.1°
: f4.0 to f22
: 1.4 m (55.1 in.) to )
(infinite)
: 1,270 g (44.8 oz.)
(excluding cap, tripod
mount and decoration ring)
: Max. dia. Ø 92.5 (3.6 in.) ×
length 227 mm (8.9 in.)
: Internal
Publicidad
