ALARM SETTING
The SATELLIT 750 has two, independently programmable alarm tim-
ers to turn it on and off at a specified time.
To set an alarm:
1. Press the AL.1 or AL.2 button for a second or until you see the
alarm hour flashing in the upper right corner of the display. While
it's flashing adjust the hour with the TUNING knob and press the
AL.1 or AL.2 button. Notice that the alarm minutes are flashing.
2. While it's flashing adjust the alarm minutes with the TUNING
knob and press the AL.1 or AL.2 button. Notice the sleep timer
flashing in the box at the top of the display.
3. While it's flashing adjust the time that the radio is to play with
the TUNING knob and press the AL.1 or AL.2 button.
Note that after setting the hour or minutes you can simply let the
flashing number time-out, without pressing the AL.1 or AL.2 but-
ton.
Once the alarm is on (by radio or buzzer), only the POWER, SLEEP,
LIGHT/SNOOZE and RESET can be operated. Press the POWER or
SLEEP buttons to turn off the alarm.
ALARM BY BUZZER
Press on [AL.1 on/off] key to select "
the alarm will be on by the buzzer.
Note: In "Timer A" section:
"
" Means timer is set by radio.
"
" Means timer is set by buzzer.
"
" Means Timer is off.
SATELLIT 750
OWNER'S MANUAL
" in "Timer A" section. Now,
15