Setting The Clock; Switching The Alarm On/Off; Setting The Alarm Time; Display Button - Grundig TRAVELER II DIGITAL G8 El Manual Del Propietario

SETTING THE CLOCK

The clock functions in 24 hour mode only, not in 12 hour, AM, PM time.
1. Set the time zone selector onto your home time zone.
2. Press the HOME/WORLD button for about two seconds and notice that
the HOME time hour in the display flashes.
3. While it's flashing, set the HOME hour with the tuning knob.
4. While it's still flashing press the HOME/WORLD button once more and
notice that the HOME minutes in the display flash.
5. While it's flashing, set the HOME minutes with the tuning knob.
6. While it's flashing, press the HOME/HOUR button to complete the setting.

SETTING THE ALARM TIME

1. With the radio turned off, press the ALARM button (bottom right under
flip cover) for about two seconds and notice the alarm hour flashing in
the display's upper right corner.
2. While it's flashing rotate the tuning knob to set the hour, then press the
ALARM button again to make the minutes flash.
3. While they're flashing rotate the tuning knob to set them, then press the
ALARM again to make the SLEEP indicator flash in the upper left corner
of the display.
4. While it's flashing press rotate the tuning knob to set the amount of time
that the alarm stays on (from 1-90 minutes).
5. Press alarm again to finalize the setting.
Note: Alarm is activated according to your world time clock; unless, you
have rotated the time zone selector back to your home time zone.
10
Traveler II Digital G8 OWNER'S MANUAL

SWITCHING THE ALARM ON/OFF

With the radio turned on or off, press the ALARM button with quick, short
presses, over and over, noticing that a speaker or a bell appears under the
box labeled 'Timer' in the upper left corner of the display.
Leave the speaker there if you want the speaker alarm to turn the radio on;
leave the bell if you want to wake up to a beeper. Leave it blank, with no
speaker or bell if you do not want the alarm.
SNOOZE/LIGHT/LOCK BUTTON
When your alarm functions and SNOOZE is pressed, it allows you to sleep for
5 more minutes, then the alarm sounds again.
Pressing the LIGHT button turns the light on for about 10 seconds.
Pressing LOCK with the radio off locks all buttons. This can keep the radio
from accidentally turning on.

DISPLAY BUTTON

Pressing the DISPLAY button sequentially with the radio off shows the
temperature, world time and alarm time in the upper right corner of the
display. Pressing it sequentially with the radio on shows home time, world
time, signal strength measured in dBu and dB, alarm time and temperature.
Press and hold the LOCK button for 2 seconds, the radio will on locks all
buttons. This keeps the radio from being accidentally being turned off or
stations from being changed. Press and hold the LOCK button again to
unlock it.
Traveler II Digital G8 OWNER'S MANUAL
11