Aiwa Z-HT63 Manual Del Usuario página 14

Use Type I (normal), Type
II
(high/CrOL) or Type
IV
(metal) tapes
for playback.
Press TAPE, then press =PUSH EJECT to open the
cassette holder.
A
Insert a tape with the exposed side down. Push the cassette
holder to close.
To select a reverse mode
on Deck 2
Each time REV MODE is pressed, the reverse mode changes.
To play one side only, select =.
To ~lav from front side to back side once only, select =1.
To plav both sides repeatedly, select (Z).
When tapes are loaded in both decks, => on the display
indicates Continuous Play.
On Deck 1, tapes are always played back on both sides once.
Insert a tape.
Press 4F to start play.
Playing
Playback
deck number
side indicator
The tape cou;ter indicates the
tape running length.
P: The front side is being played (forward).
+: The back side is being played (reverse).
When tapes are loaded in both decks
Press TAPE/DECK 1/2 first to select a deck.
The selected deck number is displayed.
To stop play, press .
To pause play (Deck 2 only), press 11. To resume play, press
again.
To change the playback side, press+ EDIRECTION/PRESET
in play or pause mode.
To fast forward or rewind, press+ or ~. Then press to
stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE. The power is turned on and play of the inserted
tape begins.
To set the tape counter to "0000"
Press CLEAR in stop mode.
The counter is also set to "0000 when the cassette holder is
opened.
14
ENGLISH