FIG. 5. CALOREX DEHUMIDIFIER INSTALLED IN PLENUM
CHAMBER, WITH TOP DISCHARGE DUCTING FITTED.
3.3 PLUMBING
a. The condensate drain at the base of the unit collects the condensation
from the evaporator fins. It is therefore necessary to ensure that the
Calorex dehumidifier is placed on a level plinth so that the condensate
water can run away and not overflow the edges of the drip tray inside the
dehumidifier.
Fig. 6. Calorex Dehumidifier with Condensate Pump Option fitted.
For applications where the condensate cannot be run to waste due to the
dehumidifier being lower than the waste pipe outlet, a condensate pump
option can be supplied. (Located internally on the DH150, DH300 and DH600
models).
SD208050 ISSUE 44
Calorex dehumidifiers have condensate water outlet connections as follows:
DH150 = 22mm push fit domestic waste system.
DH300 = ¾" BSPM stub.
DH600 = 1½" BSPM stub.
DH150
Moist Air
Dry Air
DH300/600
9