Securing Your Child; Harness Mode - Britax Child Safety GROW WITH YOU Guia Del Usuario

Britax Child Safety, Inc.

Securing Your Child

Harness Mode

Never route the vehicle belt over the child when using
this child seat in harness mode.
Adjust the belts provided with this child seat so they fit
snugly around your child. A snug strap should not allow
any slack.
It lies in a relatively straight line without sagging. It does
not press on the child's flesh or push the child's body into
an unnatural position.
Adjust the harness to fit the clothes the child is wearing.
Remove bulky coats and/or jackets before putting the
child in the child seat.
Verify that the child seat is secure and the harness is
properly adjusted around the child each time the child
seat is used.
Before you begin:
Always check the seat area for debris and remove
it to prevent interference with the harness adjuster
mechanism.
1. Loosen the harness
if necessary.
(A.) Press release lever
(B.) Pull both harness
straps forward.
2. Open the chest clip.
(A.) Press tabs.
(B.) Pull apart.
3. Release the buckle
and place the harness
straps around the
armrests.
18
WARNING!