Booster Mode - Britax Child Safety GROW WITH YOU Guia Del Usuario

Britax Child Safety, Inc.

Booster Mode

Only use a lap-shoulder belt to secure the child in booster
mode.
Use the shoulder belt guides on the child seat to ensure
proper fit.
Ensure the lap part of the vehicle belt sits low across the
child's upper thighs and that the shoulder part does not
contact the child's neck.
Before you begin:
• If your vehicle seat back is adjustable, ensure it is
in the upright position before placing the child seat
on the vehicle seat.
• Adjust the child seat to the upright position and
place forward facing on the vehicle seat, if not
already installed (see page 9).
1. Adjust the head restraint
to the highest position.
2. Place the child in the
restraint with child's
back flat against the
seat.
3. Route the shoulder
part of the vehicle
belt through the red
shoulder belt guide and
fasten the vehicle belt
across the child.
4. Adjust the head restraint
so that the vehicle
shoulder belt lays straight
across the center of the
child's chest, above the
child's shoulder and does
not contact the child's
neck (A). The lap part of
the vehicle belt is routed
low across the child's
upper thighs (B).
NOTE: Ensure the head
restraint has locked into
position.
20
WARNING!