Grundig BT 1000 DAB+ Manual De Instrucciones página 27

SETTINGS
Setting and storing FM radio sta-
tions manually
1
Press »DAB/FM« to select the FM input
source.
– Display: briefly » FM RADIO «.
2 Open the menu by pressing
Confirm the » SCAN « menu item with »
3
OK«.
– Display: » LOCAL «.
Note:
You can select whether it searches for ra-
7
dio stations with strong reception (display
» LOCAL «) or all radio stations (display:
» DX «).
4 Select the option with »E« or »F« and confirm
with » e II OK«.
R
5
Press »MENU « to close the menu.
6 Set the radio station by pressing and holding
down »E« or »F«.
– The radio station search starts and stops at
the next station with a good reception signal;
or
keep pressing »E« or »F« until you reach the
frequency you want.
– Each time you press the button, the frequen-
cy changes by 50 Hz.
7
Save the FM radio station on a preset, to do
¥
this press »PROG
H
or » « and confirm with
– Display: » STORED «.
---------------------------------------------------------------------------------------------------------------------------------------
R
»MENU «.
«. Select preset with »
¥
»PROG «.
Updating the time automatically
The time is updated automatically if a DAB or
DSR radio station transmits a time signal.
Setting the time manually
The time can only be changed in standby mode.
1 Press »ON/OFF« on the device or »
e II
remote control to switch off the device.
2
To set the time in standby mode, press and
hold »PROG
– Display: the time and day of the week.
3 Set the hour with »E« or »F« and confirm with
¥
»PROG
4
Set the minute with »E« or »F« and confirm
with »PROG
5 Set the day with »E« or »F« and confirm with
¥
»PROG
– Display: » SYNC OFF « flashes.
6
Switch on the time synchronisation by pressing
»E« or »F« (ON) and confirm with
¥
«.
– Display: the current time and the day of the
week.
Note:
If the time synchronisation is switched on
7
(ON), then the clock time is set by a DAB or
RDS radio station automatically.
Setting the clock format for the
G
«
time (12 or 24 hour)
The clock format can only be changed in standby
mode.
1
Press »ON/OFF« on the device or »
remote control to switch off the device.
2
In Standby mode select the 12 or 24 hour
clock format with
¥
« for about 2 seconds.
«.
¥
«.
«.
¥
»PROG «.
ENGLISH
8 « on the
»PROG
8
« on the
27