Documentation Overview - Rohde & Schwarz ZPH Manual De Instrucciones

®
R&S Cable Rider ZPH
1

Documentation Overview

This section provides an overview of the R&S Cable Rider ZPH user documenta-
tion. You find it on the product page at:
http://www.rohde-schwarz.com/product/zph.html
Getting started manual
Introduces the R&S Cable Rider ZPH and describes how to set up and start work-
ing with the product. A printed version is included in the delivery.
User manual
The user manual contains the description of all instrument modes and functions.
It also provides an introduction to remote control, a complete description of the
remote control commands with programming examples, and information on main-
tenance, instrument interfaces and error messages.
In addition to the R&S Cable Rider ZPH user manual, there is a separate user
manual for the InstrumentView software package. This manual contains a
description of all features of the InstrumentView software package.
Service manual
Describes the performance test for checking the rated specifications, module
replacement and repair, firmware update, troubleshooting and fault elimination,
and contains mechanical drawings and spare part lists.
The service manual is available for registered users on the global
Rohde & Schwarz information system (GLORIS,
schwarz.com).
Basic safety instructions
Contains safety instructions, operating conditions and further important informa-
tion. The printed document is included in the delivery.
Data sheet and brochure
The data sheet contains the technical specifications of the R&S Cable Rider ZPH.
It also lists the options and their order numbers as well as optional accessories.
Getting Started 1321.0944.02 ─ 04
Documentation Overview
> "Downloads"
https://gloris.rohde-
5