Connect The Tma/Adf Cable; Connect The Power Supply - HP Scanjet N6310 Guía De Inicio

1. Windows only: Decide what software to install.
• If you will be using the scanner with document-management or scanning software
that you already own, you only need to install the HP Scanjet drivers and Scanner
Tools Utility.
NOTE: For information about using non-HP software with the scanner, see
"Associate a quick start button with non-HP scanning software"
on page 5.
• If you do not already have document-management and scanning software, you
can use the HP scanning software that shipped with the scanner. Read the
onscreen descriptions of the software during the installation to decide what
software to install.
NOTE: The software and the number of CDs that ship with the scanner can
vary by country/region.
2. Insert the HP Scanning Software CD that came with the scanner into the computer
CD drive.
• For Windows installations: Wait for the installation dialog box to appear, and
then follow the onscreen instructions.
• For Macintosh installations: Double-click the CD icon that appears on the
desktop, double-click the HP Scanjet N6310 Installer icon, and then follow the
instructions on the screen.

Connect the TMA/ADF cable

Connect the TMA/ADF cable from the lid to the scanner base.

Connect the power supply

1. Plug the cable that is attached to the power supply into the power connector on the
back of the scanner.
Connect the power supply 3