Control Panel - UFESA DH4020 Manual De Instrucciones

Features and components
COMPONENTS
1

Control Panel

2
Body
3
Air outlet
4
Dehumidifier holders
5 Water tank
6
Water level indicator
7
Air Inlet
8
Air filter cover
9
Air filter cover holders
10
Air filter
11
Drain opening
12 Drain plug
13
Power cord
14
Holder for power cord fixing
15
Wheels
CONTROL PANEL
Function buttons:
A
turbo button
● Setting high/low fan speed.
B
timer button
● Enable/disable the timer function.
C
"–" button
● Reduce level of humidity.
● Reduce time in the timer function.
D
"+" button
● Increase level of humidity.
● Increase time in the timer function.
E modo button
● Enable/disable continuous operation mode.
F
on/off button
● Switch the appliance on/off.
Indicators:
G
Power indicator
● Lights up when the appliance is on.
H continuo indicator
● Lights up when the appliance is set to continuous
operation mode.
I
Full water tank indicator
● Lights up when water tank is full, has been taken out
or incorrectly installed.
A
J Display
● Displays the current humidity level in the room
(within the range from 30% to 90%).
● Displays the selected humidity value when setting
the humidity level; (within the range from 35% to 85%
with an accuracy of 5%).
● Displays time (0-24) when setting the timer function.
● Displays error and warning codes.
K
off indicator
● Lights up after an automatic off time (in the timer
function) has been set.
L on indicator
● Lights up after an automatic on time (in the timer
function) has been set.
M
High fan speed indicator
● Lights up when high fan speed has been set.
Dehumidifier principle of operation
Humid air flows through the air intake grille (7), then
flows through a cold cooling coil of the appliance.
Moisture in the air condenses on the coil and flows down
into the water tank (5) or is drained through the tube.
Pure, dry air passes through the condenser. It is then
heated. The air is then blown into the room through the
air outlet grille (3).
When the appliance is running, the
ambient air becomes slightly warmer.
Operation of the appliance
PREPARATION OF THE APPLIANCE FOR
OPERATION
When you first use the dehumidifier,
it should run in continuous mode for
24 hours.
Choose the location
● Place the dehumidifier on a flat and stable surface,
solid enough to support the weight of the appliance
with a full water tank.
● Make sure there is at least 20 cm free space from
the sides of the dehumidifier to provide proper air
circulation. Make sure there is at least 40 cm free
space from the top of the dehumidifier.