POLTI Vaporetto Handy Manual De Instrucciones página 12

• To release the accessories simply hold the
button (11) down
components.
• Before using the accessories, make sure that
they are firmly in place.
clockwise to lock it.
SAFETY CAP / "WATER OUT"
Steam may cause serious injury if in
contact with body parts. Always allow
the steamer to cool down before hand-
ling.
This appliance is equipped with the safety cap,
which prevents opening of the boiler tank as
long as there is any pressure remaining inside.
This is an important and indispensable safety
device, and it is necessary to follow certain pro-
cedures when re-filling the boiler tank.
Each time you wish to open the safety cap,
proceed as follows:
VAPORETTO HANDY
and separate the
• To connect the
accessories (6) and
(12) to steam gun or to
extension tubes, it is
necessary to fasten the
adapter first (5). Once
the adapter is secured
in place, put the
accessory and turn it
• Switch off the machine
at the on/off switch (B).
• Wait at least for 10 minutes to allow the boiler
tank to cool down.
• When cool, proceed to carefully refill the boiler
tank as described in the section "Preparation
for Use". If refilling the boiler tank when not
completely cooled, we recommend that you
then CAREFULLY pour only very small quanti-
ties of water at a time to avoid spitting from the
boiler tank. Cover exposed skin when filling.
TIPS FOR BETTER EVERYDAY
PERFORMANCE
CAUTIONS FOR CERTAIN TYPES
OF SURFACES
• For cleaning leather, wood or delicate fabrics,
consult the manufacturer's instructions. Clean
without accessories at a safe distance together
with a soft cloth and always do a test on a non
visible part of the item first or on a sample.
Allow the test area to dry completely before
observing results and effects on surface or
color before proceeding to clean further areas,
making sure that exactly the same distance
10
• Disconnect the power
cord (F) from the electri-
cal outlet.
• Press the steam con-
trol lever (4) on the
steam gun (2) so as to
fully exhaust the steam
supply from the boiler
tank.
• Unscrew the safety cap
counter-clockwise (A).