Power Down Operation - LPA S-cape 2.0 Manual Del Usuario

To lower base to the flat position during an electrical power outage,
complete the following procedure:
NOTE
FOR EMERGENCY USE ONLY. BATTERIES
ARE NOT TO BE USED FOR NORMAL
OPERATION OF BASE (9-vOLT ALkALINE
BATTERIES NOT INCLUDED)
SteP 1
Verify power supply is unplugged from electrical power source.
SteP 2
Locate (1) power down device and two (2) 9-volt alkaline batteries (not included)
(FIGURE 7).
FIGURE 7
(1) POWER
DOWN
DEvICE
SteP 3
Install (2) 9-volt alkaline batteries in power down device (FIGURE 8).
FIGURE 8
ALkALINE
BATTERIES
INSTALL ONLY
ONE WAY IN
POWER DOWN
DEvICE

Power down oPeration

(2) 9-vOLT
ALkALINE
BATTERIES
(NOT
INCLUDED)
S-cape 2.0 Furniture Style Owners Manual 290-0012-c
®
13