LPA S-cape 2.0 Manual Del Usuario página 7

SteP 4
With base still in shipping carton, rotate the entire bottom carton on
its edge and then gently rotate over so base is resting on its legs.
READ ALL INSTRUCTIONS BEFORE USING
WARNING WARNING
DUE TO RISk OF INjURY, TWO PEOPLE
ARE REqUIRED TO HANDLE AND MOvE
ADjUSTABLE BASE.
SteP 5
Remove the shipping carton and plastic packaging from the adjustable base frame.
Remove protective film from Micro-Hook™ strips, if applicable.
SteP 6
Plug electrical power cord into a working, grounded electrical outlet.
Note: an electrical surge protection device is recommended (not included).
SteP 7
Install batteries in remote control (2-AAA size, included) (FIGURE 4).
Briefly activate all functions of the base with the remote control to verify
all features are in working order. If base does not operate, refer to the
Troubleshooting section of this manual.
FIGURE 4
DISENGAGE LATCH ON
BATTERY COMPARTMENT
DOOR AND LIFT UP TO
REMOvE. INSERT TABS IN
TAB SLOTS AND SNAP LATCH
IN TO REPLACE.
DOOR
LATCH
SteP 8
Return base to the level position.
inStallation
BATTERY
COMPARTMENT
DOOR
S-cape 2.0 Furniture Style Owners Manual 290-0012-c
®
7