LPA S-cape 2.0 Manual Del Usuario página 6

SteP 2
Uncoil the main power cord and extend it out head
end of base, then remove the hardware box from
shipping container. Cut the zip-tie and remove the
mattress retainer.
SteP 3
Install (4) legs into the base frame. Place (1) plastic
washer over the threaded insert at (1) corner of the base
frame (FIGURE 2). Then, screw (1) leg into the threaded
insert, keeping the washer in between the insert and leg
(FIGURE 3). Repeat at each corner of the base.
FIGURE 2
FIGURE 3
6
S-cape 2.0 Furniture Style Owners Manual 290-0012-c
®
inStallation
PLASTIC WASHER
(placed over
threaded insert)
LEGS –
SCREW INTO
THREADED
INSERT AT
EACH CORNER
READ ALL INSTRUCTIONS BEFORE USING
WARNING WARNING
POWER CORDS MUST NOT INTERFERE
WITH ANY ADjUSTABLE BASE
MECHANISMS.
DO NOT WEAvE CORDS THROUGH BASE
STRUCTURE.
CAUTION CAUTION
CAUTION
DO NOT ATTEMPT TO SCREW
LEGS INTO ANY OTHER INSERTS.
THIS WILL DAMAGE PRODUCT.