Abicor Binzel EWR Manual De Instrucciones página 2

Preparation:
7
1 EWR gas monitoring system
2 Robot welding power source
3 Welding robot
Fig. 1 Connecting the welding monitor
EN - 2
 Operating instructions for welding monitor (WM)
1 Connect the welding monitor (7) to the compressed air line.
1
6
4 Shunt
5 Gas discharge line
6 Gas supply line
The gas outlet (5) for the EWR may remain open.
Connect the shunt simulator to both the EWR (1) and the welding monitor (7)
as follows:
2 Connect the EWR to the line with the "Master/to EWR" marking.
 Fig. 2 Connection of shunt simulator on page EN-3
3 Connect the welding monitor to the other line.
2
5 4
7 Welding monitor
BEI.0236.0 • 2017-11-24
EWR
3