Abicor Binzel EWR Manual De Instrucciones página 4

Preparing the EWR:
1
1 Orange LED (14-liter characteristic)
Fig. 3 Display
EN - 4
 Operating instructions for EWR gas monitoring system
1 Check whether an offset value has been set.
2 Set the 14-liter characteristic and press both arrow buttons (+/-) and the
On/Off button.
 Operating instructions for EWR, section 7.2 Settings
3 No offset value is set if only the orange LED (1) is lit.
If the green LED (2) is lit, the offset value must be reset. Now set the exact
reverse characteristic below or above the orange LED.
2
4 After selecting the characteristic, press both arrow buttons (+/-) and the
On/Off button.
5 Check that only the orange LED is lit.
2 Green LED (reverse characteristic)
EWR
BEI.0236.0 • 2017-11-24