Product Installation - Fulgor Milano FCLHD 8041 HID TS BK Instrucciones Para La Instalación Y Uso

PRODUCT
INSTALLATION
Before any installation operation is carried out,
make sure that the appliance is disconnected
from power supply.
TECHNICAL OPERATIONS
Place the overturned hob on an adequate surfa-
ce, preserving the glass from any scratches. Take
the filtering case out of the packaging and install
it as shown in Fig. 1. The metal hooks of the filte-
ring case are to be inserted in the specific slots,
located on the rear of the hob, as shown in fig. 2.
After having hooked the filtering case to the hob,
fix it by means of the provided metric screw, to be
used as shown in Fig. 3.
Carry on the installation by securing the hob to
the cabinet, as shown in the specific user manual
provided within the packaging of the hob.
The wiring box must now be secured to the lo-
wer part of the cabinet by means of the 4 screws
provided with the product. There is a minimum
distance from the base of the cabinet to be re-
spected, as shown in Fig. 6.
The blower assembly can now be installed as he-
reby indicated.
INSTALLATION OF THE BLOWER ASSEMBLY
(SEM).
With the aim of installing the blower assembly di-
rectly on the floor, an opening must be realized
on the bottom of the cabinet with dimensions
440x440mm (Fig. 19).
It is possible to install drawers or containers un-
der the hob, provided that they are located at le-
ast 10 cm away from its lowest part.
The products are designed to be installed under
the kitchen cabinet, in correspondence with the
lower air outlet of the downdraft.
FCLHD 9041 HID TS BK
EN
INSTALLATION INSTRUCTIONS ACCORDING
TO THE CHOSEN MOTOR
27