Hardware Pack - CharGriller Grillin Pro 3001 Manual Del Propietário

HARDWARE AND TOOLS NEEDED
Assembly: Requires 2 people. Get another person to help. Tools Needed: Pliers, Phil-
lips Head Screwdriver and a 7/16" Nut Driver.
NOTE: Do Not tighten any bolts unless instructed to do so. Tightening too soon may
prohibit parts from fitting together. All Hex Nuts should be on the inside of the grill un-
less stated otherwise. Unpack all contents in a well cleared and padded area.
Estimated Assembly Time: 45 minutes
STOP! Do Not Return to Store. If you are missing parts or need assistance please
email us at Service@CharGriller.com or call 912-638-4724.
Do not attempt to assemble or use if you are missing parts.

Hardware Pack:

Hardware:
¼-20x 1 ½" BOLT...................4 PCS
¼-20x 1/2" BOLT.................37 PCS
2/5" FLAT WASHER................2 PCS
¼" FLAT WASHER...................5 PCS
¼-20 HEX NUT......................10 PCS
¼" LOCK WASHER................33 PCS
HINGE PINS...........................2 PCS
LARGE HAIR COTTER PIN.......2 PCS
SMALL HAIR COTTER PIN.......2 PCS
SCREW....................................3 PCS
#10-24 x 0.40" BOLT..........6 PCS
1/4-20 x 31/4" Wing Bolt.......1 PC
3001_OM_E.2
3