CharGriller Grillin Pro 3001 Manual Del Propietário página 19

Step 7
Attach the Grill Body to the previous assembly cart using four Lock Washers, four Flat Washers, and
four 1/2" Hex Bolts from the inside of the Grill Body. Oriented the Grill body so that the three opening
holes on the Grill Body for the burner tubes are facing in the same side as the Front Panel.
Holes for Burners
Step 8
Install the Catch Pan onto the bottom of the Grill Body by sliding the Catch Pan underneath the Grill
Body bottom. Making sure that the Brackets on the Catch Pan rest on top of Slider Brackets. Slid the
Catch Pan all the way till you can hang the Catch Pan side bracket onto the Stopper Bracket.
Slider Bracket
Grill Body
Flat
Washers
Front Panel
Stopper Bracket
Hex Bolts
Lock Washers
Catch Pan
Catch Pan
Side Bracket
3001_OM_E.2
9