Bushnell NITRO Guia Del Propietario página 9

THE BUSHNELL DEPLOY™ MIL RETICLE
The Bushnell® Deploy™ Mil reticle provides a very accurate means of range estimation. The mil markings also allow
precise leads for moving targets and exact compensation for shooting in a crosswind. There are hashmarks at every 0.5
Mil for accurate elevation holdover. With accurate ballistic calculations, the Deploy MOA reticle delivers accurate shots,
every time.
SIGHTING IN / AIMING POINTS
The Deploy Mil reticle is intended to be sighted in at 100 yards, and is calibrated in Mil (Milrads). The reticle has wider
markings every 5 Mils. The user can sight-in at 100 yds on any magnification setting, as all Deploy Mil models are FFP.
COMPENSATING FOR THE EFFECTS OF WIND / AIMING POINTS
The Deploy Mil reticle also incorporates windage hold points on the horizontal axis in the reticle to aid in compensation
for the wind's effect on bullet trajectory. Windage hold marks are spaced at 0.5 Mil intervals, with longer marks every 5
Mil. The first few 1 Mil marks on the vertical (elevation) axis are also useful for windage purposes, as each mark is 2 Mil in
width. To use the windage hold marks, first determine a range to the target using a Bushnell laser rangefinder. Once the
range to target is available, an estimate of wind velocity must be made. The reticle can then be elevated to the correct
yardage mark and then moved horizontally into the wind direction using the Mil wind marks on the Deploy reticle in order
to compensate for bullet drop and wind drift. Illustrations of the reticle markings are shown below.
The Deploy MIL reticle is designed to be used with any caliber, bullet weight and velocity. Simply run the ballistics with a
known velocity, BC, zero distance and environmental data to get your Mil drop points at various distances.
THE BUSHNELL DEPLOY™ MIL RETICLE (FFP)
DEPLOY MIL RETICLE
™
DIMENSIONAL SPECS
12.00
0.05
0.50 PATTERN
1.00 PATTERN
0.05
ALL DIMS IN MILRAD
9