Federal Signal Corporation AM300X Instrucciones Para La Instalación Y El Mantenimiento página 3

MODEL AM300X AUDIOMASTER EXPLOSION-PROOF SPEAKER
Failure to follow all safety precautions and instructions may result in prop-
erty damage, serious injury, or death to you or others.
People's lives depend on your safe installation of our products. It is important to
follow all instructions shipped with the products. This device is to be installed by a
trained electrician who is thoroughly familiar with the National Electric Code and will
follow the NEC guidelines as well as local codes.
The selection of the mounting location for the device, its controls and routing of
the wiring is to be accomplished under the direction of the Facilities Engineer and the
Safety Engineer. In addition, listed below are some other important safety instructions
and precautions you should follow:
• Read and understand all instructions before installing or operating this
equipment.
• This unit must be installed by a qualified electrician in accordance with
all National and local Electrical and Fire Codes, under the direction of
the authority having jurisdiction.
• Do not connect this unit to the system when power is on.
• All effective warning speakers produce loud sounds which may cause, in
certain situations, permanent hearing loss. You should take appropriate
precautions such as wearing hearing protection.
• After installation, test the sound system to ensure proper operation.
• All effective warning speakers produce loud sounds, which may cause,
in certain situations, permanent hearing loss. The device should be
installed far enough away from potential listeners to limit their exposure
while still maintaining its effectiveness. The OSHA Code of Federal
Regulations 1910.95 Noise Standard provides guidelines which may be
used regarding permissible noise exposure levels.
• Show these instructions to your Safety Engineer and then file them in
a safe place and refer to them when maintaining and/or reinstalling the
unit.
• After installation and completion of initial system test, a program of
periodic testing of this device must be established. Refer to NFPA 72G,
local Fire Codes and the authority having jurisdiction for this informa-
tion.
• Consult the authority having jurisdiction in your area regarding the
proper use and installation of this product.
INSTALLATION INSTRUCTIONS
FOR
SAFETY MESSAGE TO INSTALLERS
-1-