Craftsman ZTS 7500 Manual De Instrucciones página 74

Engine Group - 20HP Kohler (987608) ZTS 7500
-
107.27788 & 107.27790
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
Foam seal to be installed
under seat support & clear
rotating engine inlet screen.
Align this edge with
bend below"HOT" & / L\
within 114-1/2" of "T,"
Bendto applyremainder _
underneathtop surface. /
2
10 Tie to hold both
_d" throttle & clutch
cables to seat supporL
2O
33 _,_
Fuel tank assembly
found in Frame, Body
& Seat Group.
@" Nuts & gasket
shipped with engine.
Torque to 18 Ft. Lbs,
30 or 24.3 Nm.
,_ _Apply anti-seize
19 _'_ ll_ I to crankshaft
Tie clutch wire _-" 15
to clutch, away id'
from belt & pulley. @"'-16
10 _17
_---18
/21
_-_ //22
TorqueRef, No.19
to 24-36 Ft, Lbs,
or 32.4-48.6 Nm,
Torque Ref No. 18
to 45-55 Ft. Lbs.
or 61.2-74.8 Nm.
PTS - 6