Mounting Cutting Tools - Stihl FSE 60 Manual De Instrucciones

Mounting Cutting Tools

Preparations
: Switch off the motor.
: Lay your trimmer on its back with
the loop handle pointing down and
the output shaft facing up.
FSE 60
4
2
1
3
Mounting the STIHL AutoCut 5-2
Assembling the Mowing Head
: Fit the spring (1) in the head (2).
All other steps are described in the
instruction sheet provided.
: Wind the nylon lines (3) onto the
spool (4).
: Thread the ends of the nylon lines
through the sleeves and place the
spool in the head.
3
6
Mounting the Mowing Head
: Push the mowing head (2) over the
shaft (5) and engage the hex recess
(7) on the external hexagon (6).
: Place the cap (8) on the head –
turn it clockwise as far as stop and
then tighten it down firmly.
Keep instruction sheet for mowing
head in a safe place.
English / USA
8
2
7
5
17