Control Panel (Sj-Xg690G, Sj-Xg740G) - Sharp SJ-XG640M Manual De Manejo

Control panel
Controlling temperature
icons
Icon
Meaning
Freezer
Freezer
compartment
compartment
Refrigerator Refrigerator
compartment
compartment
Note
• When you press one of the keys, all icons flash once
and show the standby display.
• Mode icons or indicators in operation light up on the
standby display.
When Express cool is in operation, the icon flashes on
the standby display.
Operations of useful modes
1
Select the mode icon.
2
or
Select on/off.
ON/OFF switches in the order by pressing the key.
3
Complete the setting.
Operations of additional modes
Door alarm
• When the refrigerator door is left open for over 1
minute, door alarm sounds once, and again after 1
minute.
• If the door is left open for approx. 3 minutes, the alarm
sounds continuously.
• The alarm stops after close the door.
Turn off operation
Press and
simultaneously for 3
seconds or more.
(Beep, beep, beep)
EN-6
(SJ-XG690G, SJ-XG740G)
Useful modes icons
Icon
Default
setting
Extra cool
Express freezing
-18°C
Express cool
3°C
Plasmacluster
Vacation mode
Turn-on state
Current setting
(This indication shows OFF.)
The setting is changed.
The indicator
turns off.
Default
Meaning
setting
OFF
• When there is no operation for approximately 1 minute,
the display returns to the standby display automatically.
The standby display turns off if there is no operation for
another 1 minute.
• If the refrigerator stops because of power failure, the
modes except for Extra cool, Express freezing and
Express cool function the same way as before at the
time of re-power.
When press
the order shown as below.
Sound of button operation
• The electric sound is operated when touching each
keys.
Turn off operation
Press and
(Beep, beep, beep)
Note
When you want to turn on the additional mode, follow
the same step again. (The indicator turns on.)
Operation keys
Additional modes
Indicator
Meaning
Door alarm
Sound of key
operation
button, the icons change in
Standby display
Standby display
"Express cool"only
3
Complete the setting by pressing for
3 seconds or more.
(Beep, Beep, Beep)
simultaneously for 3 seconds or more.
Default
setting
ON
The indicator
turns off.