Setting A Paper Size And Type; Specifying Initial Fax Settings And Connecting A Telephone Cable (Mf4890Dw/Mf4880Dw/Mf4770N Only) - Canon imageCLASS MF4890DW Guia De Inicio Rapido

For details on the installation procedures:
See the MF Driver Installation Guide.
• We ask for the user's cooperation for the Product
Extended Survey Program. For details, see the
descriptions on the screen.

Setting a Paper Size and Type

Following the instructions on the screen, set the paper size
and type.
MF4890dw/MF4880dw/
●
MF4770n
Paper Settings
MP Tray
Drawer 1
1
Applying settings...
Wait a moment.
D560/D530
●
Specifying Initial Fax Settings and
Connecting a Telephone Cable
(MF4890dw/MF4880dw/MF4770n Only)
1
Specify the initial fax settings.
Perform fax setup?
Set up Now
Set up Later
Follow the "Fax Setup Guide" to specify a fax number, a
unit name, and a receive mode. For more details on the
receive mode, see the e-Manual.
e-Manual "Fax" ▶ "Using the Fax Functions" ▶
"Receiving Faxes" ▶ "RX Mode"
How to use a username
When you send a document, the sender information
that you registered is printed on the recipient's paper.
2
Connect a telephone cable.
B
A
Telephone line connector
Telephone
When <Connect phone line.> appears on the display,
connect the telephone cable by referring to the
illustration.
3
Exit the Fax Setup Guide, and then restart the
machine.
End Fax Setup
Guide?
Yes No
Turn OFF the machine and wait for at least 10 seconds
before turning it ON again. The telephone line types are
not detected automatically. See the e-Manual and set a
telephone line manually.
e-Manual "Fax" ▶ "Using the Fax Functions" ▶
"Changing Fax Settings (Settings that Can Be Specifi ed
Using the [Menu] Button)" ▶ "Confi guring Send
Settings" ▶ "Select Line Type"
Connect phone line.
Follow illustrations
on the next screen:
Connect line to A.
*Next : Press OK
En
Setting is complete.
Turn the main power
OFF and ON.
OK
13