NIPRO Diagnostics TRUE2go Manual Del Propietário página 15

To Attach / Remove TRUE2go Meter to
TRUEtest Test Strip Vial
The TRUE2go Meter is made
to attach to the top of the
TRUEtest Test Strip vial cap.
To attach:
1. Set Test Strip vial on flat
surface with vial lip facing front.
2. With Test Port facing right, place
bottom of Meter firmly on vial
top. Meter must be seated flat on
top of vial cap.
3. Holding the vial, twist the Meter
1/4 turn clockwise. The Test Port
area on the Meter should cover
the vial lip if attached properly.
4. To open the vial, lift up on the
Meter under the Test Port.
To remove:
1. Holding the vial, twist the Meter
1/4 turn counterclockwise.
2. Lift off Meter from vial top.
The Meter may also be used for
testing without attaching to the vial.
Test
Port
Vial Lip
13
Lift Up To
Open