Nevir NVR-6137 MEDGS Manual De Instrucciones página 17

FRAME INSTALLATION STEPS
1.Cabinet must be finished as per cabinet dimensions.
Put the plastic buckle setting paper( Component 1)
on the bottom board of cabinet cavity.
Keep the paper's front edge and the cabinet
outside edge in one line. Then put
the orientation(Component 2) on the paper
and adjust their holes as per the hole position
in the drawing. Then fix the bolt (Component 3).
3、Open the microwave oven,
fix the bolt (Component 5) and
beat it into the cabinet, then install
screw cover (Component 4) 。
FRAME安装说明书
2.Put the microwave oven into the cabinet and keep
the microwave oven in a horizontal direction and keep
the edge distance of two side as same.Then fix the
orientation on then back of microwave oven.
17