Calling A Number From Contacts; Adjusting Volume; Caller Id Function; Vibrate On/Off Mode - Verizon Wireless RAZZLE Guia Del Usuario

This places the first call on hold. To switch back to the first caller, press
the SEND Key again.

CALLING A NUMBER FROM CONTACTS

1. From idle mode, press the OK Key to unlock the keypad, then press the
Right Soft Key [Contacts].
2. Select the Contact entry and press the OK Key [VIEW], then select the
desired phone number.
3. Press the SEND Key
to place the call.
Selecting the Contact entry and then pressing the Send Key
Number of the Contact entry automatically. If multiple numbers are saved in the
Contact List, select the Contact entry, then select the phone number you want to dial.
Then press the Send Key .

ADJUSTING VOLUME

To adjust the master volume:
1. From idle mode, press the OK Key to unlock the keypad, then press the
Volume Keys / up or down.
2. Select one of the following options and press the OK Key [SET] to
save it.
All Sounds Off
Alarm Only
Vibrate Only
Low / Medium Low
Press the Volume Keys
a call.
To play a ringtone, press the Left Soft Key

CALLER ID FUNCTION

Caller ID displays the number of the person calling when your phone
rings. If the caller' s identity is stored in Contacts, the name appears on the
will dial the Default
screen. The caller ID is stored in the Recent Calls Menu.

VIBRATE ON/OFF MODE

Vibrate Mode mutes key tones and alerts for an incoming call or message. To
activate Vibrate Mode:
1. From idle mode, press the OK Key to unlock the keypad, swivel to the
QWERTY keypad, then press and hold the # Key
ENABLED" appears on the display.
2. To disable Vibrate, press and hold the # Key
MODE DISABLED" appears on the display.
/ Medium / Medium High / High
/ up or down to adjust Earpiece volume during
[Play].
.
again.
Basic Operation − Chapter 2
"VIBRATE MODE
"VIBRATE
23