4
Introduction
ABOVEGROUND POOL AND SPA HEATERS
Congratulations on your purchase of a MiniMax 100 high performance heating system. Proper installation and
service of your new heating system and correct chemical maintenance of the water will ensure years of
enjoyment. The MiniMax 100 is a compact, lightweight and efficient gas fired high performance aboveground
pool and spa heater that can be connected to schedule 40 CPVC or ABS pipe and has a built-in top. Unless
noted otherwise, all instructions refer to both the MiniMax 75 and MiniMax 100 heaters designated collectively
as the "MiniMax 100". The heater features include the following features.
• Reliable direct-spark ignition (DSI) system available in propane or natural gas versions.
• Millivolt standing pilot versions in propane and natural gas, when no convenient line power is present.
• Quiet and dependable operation from packaged burner system proven reliable in worldwide usage.
• Heat exchanger constructed of premium non-corroding materials including bronze headers standard.
• The controls have been designed to be very easy to troubleshoot and very easy to access and replace in
the rare event of a malfunction-making the MiniMax 100 user friendly.
IMPORTANCE NOTICES FOR THE INSTALLER AND OPERATOR
The manufacturer's warranty may be void if, for any reason, the heater is improperly installed and /or operated.
Be sure to follow the instructions set forth in this manual.
These heaters are designed for the heating of chlorine, bromine or salt system swimming pools and spas, and
should never be employed for use as space heating boilers or general purpose water heaters.
CODES
The installation must conform with local codes or in the absence of local codes with the latest National Fuel Gas
Code, ANSI Z223.1, and the latest edition of the National Electrical Code, NFPA 70.
Installation in Canada to be made in accordance with the latest CAN/CGA-B149.1 or .2 and CSA C22.1
Canadian Electric Code, part 1.
P/N 471105
®
MiniMax
75 & 100
Rev. H 10-16-07