TABLE 3. Accessories
Item
Main Unit
Owner's Manual
Engine Manual
Quart SAE Oil
Oil Filter
Air Filter
Spark Plug
Spark Plug Wrench
Shop Towel
Top Cover (8)
Wheel (1)
Frame Foot (2)
Steel Lifting Pocket (3)
Hardware Bag
Hair Pin (4)
Axle (5)
5/8" Flat Washer (6)
45mm Bolt (7)
Binding Post Assembly (9)
20mm Bolt (10)
Nut (11)
3. Call Generac Customer Service at 1-888-
GENERAC (1-888-436-3722) with the unit
model and serial number for any missing
carton contents.
4. Record model, serial number, and date of
purchase on front cover of this manual.
Assembly
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Call Generac Customer Service at 1-888-
GENERAC (1-888-436-3722) for any assem-
bly issues or concerns. Please have model
and serial number available.
8
WARNING
(000100a)
The following tools are required to install the
accessory kit.
• Screwdriver (1)
Qty.
• 8mm Wrench (2)
1
• 13mm Wrench (2)
See
Figure
1
Install lifting pocket assembly as follows:
1
1. Install each halve of lifting pocket (3)
underneath frame and loosely assemble
1
with 45mm bolt (7) and nut (11) through
1
holes in frame.
2. Install 20mm bolt (10) and nut (11) through
1
top holes of lifting pocket halves.
1
3. Tighten all bolts securely.
4. Align each top cover (8) with bottom lifting
1
pocket (3) holes. Insert binding post (9)
1
barrel and secure with binding post screw
(9).
2
2
2
10
2
Qty.
9
2
1
2
8
2
Figure 2-9. Steel Lifting Pocket Assembly
2
NOTE: The wheels are not intended for over-
the-road use.
6
See
Figure
Install wheels as follows:
1. Slide axle (5) through generator frame
axle holes.
2. Slide wheel (1) and one 5/8" flat washer
(6) onto axle.
3. Secure with hair pin (4). Repeat on oppo-
site side.
Install frame foot assembly as follows:
1. Align frame foot (2) with holes in frame
and secure with 45mm bolts (7).
2-9.
7
3
2-10.
Owner's Manual for Portable Generator
11
9
8
11
003759