Winterizing; Frequently Asked Questions - Speck pumps Badu Stream II Manual De Operación Y Servicio

Winterizing

In areas subject to freezing water temperatures, you should protect your equipment. We recommend you purchase
a winter cover kit part #2308752006K. This kit includes one (1) winter plate, one (1) gasket and four (4) screws.
See Figure 5. Please call your local pool professional to install.
Figure 5
Winter Cover Kit
4

Frequently Asked Questions

Frequently Asked Questions
I can over swim the system, is there something I can do to help me from swimming through the system?
Slow your pace down until you found the stroke that will prevent you from out swimming the system. Depending
on the size of the pool you could drift back and swim into the stream and try to find the "sweet spot" which is
about 4' from the jets.
How can I use the system for my kids? Our BADU swim jets systems will add fun and enjoyment for all ages.
The kids can boogie broad against the current. Kids can play in front of the current. To do this turn the air up and
just the adjust nozzles upwards to create a choppy white water e ect.
What is a self-priming pump?
A self-priming pump has the ability to remove air from the plumbing lines when installed above water level (up to
4 feet). During the initial startup, the pump must be filled with water. You should never run the pump dry.
Why must a self-priming pump first be filled with water?
A self-priming pump must have a su cient amount of water in the pump housing. Only then can air be removed
from the suction line. It is necessary to fill your pump up to the suction connection with water. If you do not fill
the pump with water you may damage the mechanical seal in the pump.
What are the maintenance requirements for the pump?
The Speck Model 21-80/33 GS pumps are generally maintenance free. From time to time you should carry out
a visual inspection. Check to see if pump is leaking, a few drops is normal. Remove any debris around the pump.
10
Gasket
Winter Plate
Screws (4x)