Changing From °C To °F - Techne CE3350 Manual Del Usuario

Changing from °C to °F
If you wish to change the display units then you will have to follow this procedure:
Be careful not to change any of the other settings! The correct values are given below so that
should you accidentally change one you can correct it.
1. Press both arrow buttons, , for 3 sec. tunE will be displayed.
2. Press the down arrow button, . LEUL will be displayed.
3. Press and hold the star button, *, and press the up arrow button,
4. Press the up arrow button on its own,
5. Press and hold both the arrow buttons,
6. Press and hold the star button,*, and press the down arrow button,
7. Press the down arrow button on its own,
8. Press and hold the star button,*, and press the down arrow button,
9. Press and hold the up arrow button,
10.Press the star button,*, and the up or down arrow button,
11.When you have set the units you require:
Press the down arrow button, , until LEULis displayed.
12.Press and hold the star button, *, and press the up arrow button,
13.Press the up arrow button, , until UEr is displayed.
14.Press and hold both the arrow buttons,
15.Press and hold the star button,*,and press the up arrow button,
16. Press both the arrow buttons,
Level 1 tune
bAnd
int.t
dEr.t
dAC
CYC.t
ofSt
SP.LK
SEt.2
bnd.2
CYC.2
Level 2 SP1.P
hAnd
PL.1
PL.2
SP2.A
SP2.b
diSP
hi.SC
Lo.SC
inPt
unit
, until 3 is displayed.
, until UEr is displayed.
, for 10 sec. LoCK will be displayed.
, until nonE is displayed.
, until LEUL is displayed.
, until 2 is displayed.
, until unit is displayed.
or , to select °C or °F only.
, until 3 is displayed.
, for 10 sec. LoCK will be displayed.
, until ALL is displayed.
, for 3 sec to come out of the program mode.
off Level 3 SP1.d SSd
19 SP2.D rly
1.3 burn uP.sc
5 rEU.d lr.2d
3.0 rEU.L ln.2n
0.3 SPAn 0.0 #Adjust to suit
0 ZEro 0.0
off ChEK off
0 rEAd UAr°
1.0 dAtA CtA
on of UEr 2
rSet none
0 Level 4 LocK ALL
off ProG Auto
100 no.Al off
100 diS.S 6
none dEr.S 0.5
none
0.1°C # All units may be diffferent,
350.0 make a note of the value
0 for your unit
Rtd (PRT)
°C
14