Toto NEOREST SE Manual De Instrucciones página 23

●The method is the same as for filling the bathtub. (► See page 17) Water at the preset temperature
will be added to the bathtub.
The amount of water in the tub after using the Fill-Tub feature will vary with the amount of starting water.
When starting with less than 5-1/2" (14 cm) of water in the tub.
The ending water level will be above the selected water level by the amount of
starting water.
Less than 5-1/2" (14 cm)
of water in the bathtub
Tub filler
Less than 5-1/2"
Starting water
(14 cm)
When starting with at least 5-1/2" (14 cm) of water in the tub.
The amount of water needed to reach the selected water level is calculated and
that amount of water is added to the bathtub.
ӿ 26 gallons (100L) of water will be added to the bathtub when the amount of water to be added is calculated
at less than 26 gallons (100L).
Tub filler
Starting water
The amount of water needed to reach
the selected water level is calculated.
Case 1: The calculated
amount of water is at
least 26 gallons (100L).
Case 2: The calculated
amount of water is less
than 26 gallons (100L).
23
Adding more water (Add water)
Water added by the normal
amount of the selected level
At least 5-1/2"
(14 cm)
►
►
Fill-tub feature ends
ӿ
Fill-tub feature ends
Fill-tub feature ends
Normal amount
Starting water
Calculated amount
Starting water
26 gallons (100L)
Starting water