Wlan Internet Access Points - Nokia N79 Guia Del Usuario

of the access point groups, select an access point
marked with , and select Edit.
Follow the instructions from your service provider.
Select from the following:
Access point name — You obtain the access point
●
name from your service provider.
User name — The user name may be needed to
●
make a data connection, and is usually provided by
the service provider.
Prompt password — If you must enter the
●
password every time you log in to a server, or if you
do not want to save your password in the device,
select Yes.
Password — A password may be needed to make
●
a data connection and is usually provided by the
service provider.
Authentication — Select
●
your password encrypted or
password encrypted when possible.
Homepage — Depending on the access point you
●
are setting up, enter the web address or the address
of the multimedia message centre.
Select Options Advanced settings
>
following:
Network type — Select the internet protocol type
●
to transfer data to and from your device. The other
settings depend on the selected network type.
Secure to always send
Normal to send your
and from the
Phone IP address (for IPv4 only) — Enter the IP
●
address of your device.
DNS addresses — Enter the IP addresses of the
●
primary and secondary DNS servers, if required by
your service provider. To obtain these addresses,
contact your internet service provider.
Proxy server address
●
proxy server.
Proxy port number
●
the proxy server.

WLAN internet access points

Press , and select Tools
Connection Destinations
>
and follow the instructions on the screen. Or, open one
of the access point groups, select an access point
marked with , and select Edit.
Follow the instructions from your WLAN service
provider.
WLAN network name
●
Search for networks. If you select an existing
network, WLAN network mode
security mode are determined by the settings of its
access point device.
Network status — Define whether the network
●
name is displayed.
WLAN network mode
●
an ad hoc network and to allow devices to send and
receive data directly; a WLAN access point device is
— Enter the address of the
— Enter the port number of
Settings
> >
New access point,
>
— Select Enter manually
and WLAN
— Select Ad-hoc to create
or
163