Position Requests; Landmarks - Nokia N79 Guia Del Usuario

If the weather conditions are bad, the signal
●
strength may be affected.
Some vehicles have tinted (athermic) windows,
●
which may block the satellite signals.
Check satellite signal status
To check how many satellites your device has found,
and whether your device is receiving satellite signals,
press , and select Tools
data Position Options
> >
in the Maps application, select
view GPS info.
>
If your device has found
satellites, a bar for each
satellite is shown in the
satellite info view. The longer
the bar, the stronger the
satellite signal. When your
device has received enough
data from the satellite signal to calculate the
coordinates of your location, the bar turns black.
Initially your device must receive signals from at least
four satellites to be able to calculate the coordinates
of your location. When the initial calculation has been
made, it may be possible to continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when more
satellites are found.
Connectivity GPS
> >
Satellite status. Or,
>
Options Map
>

Position requests

You may receive a request from a network service to
receive your position information. Service providers
may offer information about local topics, such as
weather or traffic conditions, based on the location of
your device.
When you receive a position request, a message is
displayed showing the service that is making the
request. Select Accept to allow your position
information to be sent or

Landmarks

Press , and select Tools
Landmarks.
With Landmarks, you can save the position information
of specific locations in your device. You can sort the
saved locations into different categories, such as
business, and add other information to them, such as
addresses. You can use your saved landmarks in
compatible applications, such as
GPS coordinates are expressed in degrees and decimal
degrees format using the international WGS-84
coordinate system.
To create a new landmark, select
landmark. To make a positioning request for your
current location, select Current
Reject to deny the request.
Connectivity
> >
GPS data and Maps.
Options New
>
position. To enter the
53