SETTINGS
Menu
Setup
11.4 Menu
In this menu there's the possibility to modify the default parameters and to visualize the product infor-
mation.
MENU
Timer dust container
Suction stop
Maintenance
Info
Date/time
11.4.1 Menu timer of the dust container
In this menu you can modify the parameter relating to the Dust Alarm which refers to the dust container
(bin) selected during the installation phase. The unit of measurement is expressed in hours.
TIMER DUST CONTAINER
▲
10 (h)
▼
11.4.2 Menu suction stop
In this menu you can activate/deactivate the suction stop for the fi lter alarm, dust alarm and service
alarm 1 and 2, each of them separately.
If this function is activated, the suction will stop within 15 minutes from the alarm.
CAUTION: To avoid malfunctions of the central vacuum unit it is advisable to always activate the suction
stop when the unit displays an alarm.
SUCTION STOP
Allarm Filter
Allarm Dust
Allarm Service 1
Allarm Service 2
21/01/16 Rev:3.0.0
Press the Up and Down arrows to scroll
2
in the menu.
Press Enter to access the selected sub-
menu.
Press Esc to exit.
Press the Up and Down arrows to scroll
1
in the menu.
Press Enter to access the selected sub-
menu.
Press Esc to exit.
Press the Up and Down arrows to modify
1
the parameter.
Press Esc to confi rm the change and exit
the menu
Press the Up and Down arrows to select
1
the kind of alarm.
Press ENTER to activate/deactivate the
suction stop.
Press Esc to confi rm your choice and exit
the menu.
Selection is active
Selection is not active
2
35