Safety Instructions - ProMed UV-LED 60 Instrucciones De Empleo

S
AFETY INSTRUCTIONS
Please pay attention to the following before first time operation:
Never place the unit in direct contact with fire, gas, oxygen or hot objects such as hot plates.
Please observe the following during operation:
A. Power supply for the device: 100V~ -240V~.
B. Take any measures necessary to prevent the device from falling or becomes damaged in
any way.
C. If problems do arise with the unit handpiece, take it immediately to get it repaired.
D. Do not lubricate or wash the unit.
E. For indoor use only.
F. Scrupulous supervision is required when the device is being used in the vicinity of children.
DANGER!
• Do not place the unit in direct contact with water or other fluids.
• Never place or use the unit in
a wet or moist environment.
• Do not touch the unit with wet hands.
• Only operate the unit with the specified line voltage.
DE
• It is not permitted to use the unit outdoors.
EN
WARNING!
• Make sure that children do not play with the device.
• Never leave the unit unattended when children or inexperienced persons are in its vicinity.
• Only use the unit for the applications described in this manual.
FR
• Never use the unit after the electrical lead has been damaged, when the unit has fallen
down or when it has come in contact with water.
• This unit is not designed to be used by people (including children) who have limited
IT
physical, sensory, or intellectual abilities or who do not have sufficient experience and/
or sufficient knowledge. This does not apply if these people are supervised by a person
responsible for their safety or receive instructions from them on how to use this unit.
ES
• Never let children play with the packaging material; there is a risk of suffocation.
• An electrical appliance is not a toy. Children do not recognize the risks that could develop
when using electrical appliances. Therefore, operate and store the unit out of the reach of
children.
NL
• Do not place or use the unit on hot surfaces or near naked gas flames to ensure that the
casing does not melt.
• Never let the unit come into contact with water. Use a moist cloth to clean the unit. Do not
RU
use solvents.
• Never carry or pull the unit by the power cord. Use the plug to pull the power cord out of
the wall socket. Do not pull on the power cord itself.
• Do not pull the power cord over sharp edges, wedge it in between objects, hang it down
PL
or position or hang it over hot objects (e.g., hot plates) or naked flames. Protect the power
cord from heat or oil.
• Only use extension cords when you have satisfied yourself beforehand that they are not
SE
defect or damaged.
• If the power cable of the appliance gets damaged, have it replaced by an expert
immediately.
FI