Safety Instructions - ProMed Smartfile Instrucciones De Empleo

S
AFETY INSTRUCTIONS
Please pay attention to the following before first time
operation:
Never place the unit in direct contact with fire, gas, oxygen or
hot objects such as hot plates.
Please observe the following during operation:
A. Grinding heads to be used:
• Standardized dental size: 2.332 - 2.350 mm / 0.091 - 0.093
inches.
• Only use centered grinding heads with a rounded shaft end.
• The use of rusted or bent grinding heads is not permitted.
B. Use the speed controller carefully.
C. Switch the unit off before you change the direction of rotation.
D. Before you switch the unit on, you must set the rotating speed
(rotary knob (F)) to zero.
E. Appliance power supply: 100 V~ or 240 V~.
F. Switch the unit off before you change the grinding head.
G. Take every precaution possible to ensure that the unit does
not fall down or get damaged in any other way.
H. If problems do arise with the handpiece, take it immediately
to get it repaired.
I. Do not lubricate or wash the handpiece.
J. Only for home use.
K. Scrupulous supervision is required when the device is being
used in the vicinity of children.
DE
EN
FR
IT
ES
NL
RU
PL
SE
FI