Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Disengage
all clutches before starting
the engine (motor).
3.
Do not operate the snow thrower
without wearing adequate winter outer
garments.
Wear footwear that wilt
improve footing on slippery suffaces_
4.
Handle fuel with care; it is highly
flammable.
(a)
Use an approved fuel container.
(b)
Never remove fuel tank cap or add
fuel to a running engine or hot
engine.
(¢)
Fill fuel tank outdoors with
extreme
care_ Never fill fuel tank
indoors.
(d)
Replace fuel tank cap securely
and wipe up spilled fuelo
(e)
Never store fuel or snow thrower
with fuel in the tank inside of a
building where fumes may reach
an open flame or spark,
(f)
Check fuel supply before each
use, allowing space for expansion
as the heat of the engine (motor)
and/or sun can cause fuel to
expand.
5.
Use extension cords and receptacles
as specified
by the manufacturer
for all
snow throwers with electric drive
motors or electric starting motors.
6.
Adjust the snow thrower height to clear
gravel or crushed rock surfaces.
7.
Never attempt to make any adjust-
ments while the engine (motor) is
running (except when specifically
recommended
by the manufacturer).
8.
Let engine (motor) and snow thrower
adjust to outdoor temperatures
before
starting to clear snow.
9.
Always wear safety glasses or eye
shields during operation
or while
performing
an adjustment or repair to
protect eyes from foreign objects that
may be thrown from the snow thrower,
OPERATION
Do not operate this machine if you are
taking drugs or other medication which
can cause drowsiness
or affect your
ability to operate this machine.
2.
Do not use this machine if you are
mentally or physically
unable to
operate
this machine safely.
3.
Do not put hands or feet near or under
rotating parts. Keep clear of the
discharge
opening at all times.
4.
Exercise extreme caution when oper-
ating on or crossing gravel drives,
walks, or roads. Stay alert for hidden
hazards or traffic.
5.
After striking a foreign object, stop the
engine (motor), remove the wire from
the spark plug, disconnect the cord on
electric motors, thoroughly inspect the
snow thrower for any damage,
and
repair the damage before restarting
operating the snow thrower.
6.
If the snow thrower should start to
vibrate
abnormally, stop the (motor)
and check
immediately
for the cause.
Vibration is generally a warning of
trouble°
7.
Stop the engine (motor) whenever you
leave the operating position, before
unclogging the auger/impeller
housing
or discharge guide, and when making
any repairs, adjustments,
or inspec-
tions.
8.
When cleaning, repairing, or inspecting,
make certain the auger/impeller
and all
moving parts have stopped. Disconnect
the spark plug wire and keep the wi:re
away from the plug to prevent acciden-
tal starting.
9.
Take all possible precautions when
leaving the snow thrower unattended.
Disengage the auger/impeller,
stop
engine, and remove key.
10. Do not run the engine indoors, except
when starting the engine and for
transporting the snow thrower in or out
of the building. Open the outside doors;
exhaust fumes are dangerous
(contain_
ing CARBON
MONOXIDE,
an ODOR-
LESS and DEADLY GAS).
11. Do not clear snow across the face of
slopes. Exercise caution when changing
direction on slopes. Do not attempt to
clear steep slopes.
12. Never operate the snow thrower without
proper guards, plates or other safety
protective devices in place.
13. Never operate the snow thrower near
glass enclosures, automobiles,
window
wells, drop-offs, and the like without
dProperadjustment of the snow
ischarge
angle. Keep children and
pets away.
14o Do not overload the machine capacity
by attempting to clear snow at too fast
a rate.
15. Never operate the snow thrower at high
transport speeds on slippery surfaces_
Look behind and use care when
backing.
16. Never direct discharge at bystanders or
allow anyone in front of the snow
thrower.
Publicidad
