Publicidad
Idiomas disponibles
Idiomas disponibles
17. Disengage power to the auger/impeller
when snow thrower is transportedor
not in use.
18. Use only attachmentsand accessories
approvedby the manufacturer of the
snow thrower (such as tire chains,
electric _Jtart k its, etc,).
19. Never operate the snow thrower
without good visibili_ or light. Always
be sure of your footing, and keepa
firm hold on the handles.Walk; never
run.
MAINTENANCE
AND STORAGE
Check shear bolts and other bolts
frequently for proper tightness
to be
sure the snow thrower is in safe
working condition.
2. Never store the snow thrower with fuel
in the fuel tank inside a building where
ignition sources are present such as
hot water and space heaters, clothes
dryers, and the like. Allow the engine to
cool before storing in any enclosure.
3. Always refer to operator's manual
instnJctions for important details if the
snow thrower is to be stored for an
extended
period_
Contents
of Parts Bag (actual size)
1 - Owner's Manual (not shown)
1 - Packet of Fuel Stabilizer (not shown)
1 - Warranty Card (not shown)
2 - Parts Bags (not shown)
*Non-Assembly
Parts, found
in tool box located on belt cover.
4o Maintain or replace safety and instruc
tion labels, as necessary.
5. Run the snow thrower a few minutes
afferthrowing
snow to prevent freeze-
up of the augedimpelter.
A
WARNING:
This snow thrower is for
use on sidewalks,
driveways and other
ground level surfaces°
Caution should be exercised while using on
steep sloping surfaces. DO NOT USE
SNOW THROWER
ON SURFACES
ABOVE GROUND
LEVEL such as roofs of
residences,
garages, porches or other such
structures or buildings.
1 -Washer, Hvsptlk
D
1- Nut, 1/2-13 Hexjam
*2 - Shear Pins
*2 - Spare Spacers
3 -Hex Nylon Nuts, 5/16-18
1 - Starter Motor Cord 10Ft.
4 - Flatwashers 11132 In.
__1.
Nut, 5116-18 Reghex
4
I
1- Shifter Knob
Publicidad
