Charging The Built-In Battery; The Functions At A Glance - Gigaset ZX600 Manual Del Usuario

3.4 Charging the built-in battery

Gigaset ZX600 has a built-in battery, which must be charged fully
before using the headset. Charging takes about 2 hours. You can
charge the headset through the AC adapter or USB connector on
the computer.
Note:
1 Be sure the USB connector is aligned correctly and do not
force the connection. Use the USB icon on the connector and
in the illustrations below as a guide.
2 The headset is disabled when charging.

4. The functions at a glance

Short press
Long press
Press and hold
MFB button
Button .. (Vol+)
Button . (Vol-)
Phone operation: Pairing the headset with a phone
Before you can use the headset to make calls, you must pair the
headset with your phone. Pairing creates a secure link between
your phone and the unique ID of the headset. You only have to
pair devices once.
1 To put the headset in pairing mode, press and hold (longer
than 5 seconds) the multi-function button until the LED
flashes red/blue.
2 Scroll to the Bluetooth menu in your Gigaset phone and
search for active devices. Refer to your phone's user manual
for details.
3 When the search is completed, a list of found devices is
displayed.
4 Select ZX600 and, when prompted, input the default passkey
(0000). When successfully paired, the red/blue LED on the
headset changes to flashing blue.
Using USB charging adapter
USB Charging Interface
Time period/function
Press less than 1 second
Press more than 3 seconds
Press more than 5 seconds
Multi-function button
Volume up button
Volume down button
Using USB cable
5