Descargar Imprimir esta página

Fein Slugger JCM125Q Manual Del Usuario página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

3 41 01 165 21 0.book Seite 16 Mittwoch, 7. September 2011 12:05 12
en
16
Maintenance.
Before mounting or replacing cutting tools or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Exchangeable parts
If required, you can change the following parts
yourself:
Application tools, spoke handles, stroke
adjustment lever, chip guard, accessories
(Figure 10)
Service
Have maintenance carried out
WARNING
only through qualified person-
nel. Incorrectly mounted leads and components
can cause serious injuries. Have the required
service carried out only through a Slugger
customer service agent.
When replacing the power tool's protective
cable bushing or cord between the drill stand
and drill motor is required, this must be car-
ried out by Slugger or by an authorized Slug-
ger Service Agent, in order to avoid
hazardous situations.
When replacing the power tool's cable is
required, have this carried out by Slugger
or by an authorized Slugger Service Agent, in
order to avoid hazardous situations.
Cleaning
Prior to any cleaning or main-
WARNING
tenance, disconnect the power
tool from the power supply in order to avoid
accidents.
When using in environments
WARNING
with conductive dust in the air,
such as when cutting metals, this dust can set-
tle in the interior of the power tool. This can
impair the total insulation of the power tool.
Therefore, regularly blow out the interior of the
power tool from outside via the ventilation
openings with dry, oil-free compressed air;
always wear eye protection when doing this.
For additional protection, connect a residual
current device (RCD) on the line side.
Do not attempt to clean clogged or dirty
ventilation openings of the power tool
with pointed metal objects; use non-
metal tools or objects if necessary.
Do not use cleaning agents and solvents
that can cause damage to plastic parts.
These include: Gasoline, carbon-tetrachlo-
ride, chloric solvents, ammonia and domestic
cleaning agents that contain ammonia.
Accessories.
Only use accessories recommended by Slug-
ger.
Warranty and liability.
The warranty for the product is valid in
accordance with the legal regulations in the
country where it is marketed.
Environmental protection,
disposal.
Packaging, worn out power tools and acces-
sories should be sorted for environmentally-
friendly recycling. Further information can be
obtained from your specialist dealer.

Publicidad

loading