Pahlen 300A Classic Manual De Instrucciones página 6

LED light type 300 Classic
Spare part LED light typered/green/blue or white
Item no. 123261
Item no. 123361
Technical specification
Standard input voltage: 12V AC
Effective output: See rating plate on the lamp (max 50W)
Installation
This light is suited for most PAR56 standard pool lights. It is only for use under water. The pool light shall be connected through
an isolation transformer 12V 60W/300W. If you have more than one LED light PAR56 in your pool, make sure all these lights are
installed on the same transformer, circuit and switch.
Both types of lights are connected the same way. See circuit diagram below and installation drawing on the next page.
The spacer (pos 9) shall be placed where the cable meets the cable gland.
If the external cable or cord of the light is damaged, it shall be replaced by a service agent or other qualified person.
Start-up
Make sure that each light is installed correctly.
Synchronizing multiple lights
1. To synchronize the lights to the same program, turn the lights on, wait for a few seconds.
2. Turn off the lights and wait for a minimum of 12 seconds, then switch back on.
3. Change the colour/program 2 times. Now they are synchronized.
Once the lights are synchronized, they will stay that way until one of the LED lights is replaced or one light is switched on
separately from the others.
Changing colour/program: Turn the lamps off and quickly back on (max 10 sec. off).
Memorizing the last colour/program:
1. Select the desired colour/program.
2. Turn the lamps off for minimum 12 seconds. The chosen program has now been memorized.
Assembly order LED light unit
1. Front ring
2 U-list
3 Lamp
4 Bracket
5 Screw M4
6 Foot
7 Screw M5
8 Spacer
The red/green/blue light
The LED light PAR56 is a very advanced electronic controlled light based on
LED's in three colours: red, green and blue. Together these three colours can
produce many other colours.
With the on/off switch for your pool lights, one of the 16 preprogrammed light
effects can be selected.
16 program
1. Whitish fixed colour warm white
2 Red fixed colour red
3 Green fixed colour green
4 Blue fixed colour blue
5 Green-blue fixed colour green/blue
6 Red-green fixed colour red/green
7 Blue-red fixed colour blue/red
8 Evening sea slow change of colour red/blue
9 Evening river slow change of colour red/green
10 Riviera slow change of colour green/blue
11 White fixed colour neutral white
12 Rainbow slow change of colour blue/red/green
13 River of colours program 12 followed by program 15
14 Disco rapid change of colour
15 Four seasons slow change of colour red/blue/green/violet
16 Party rapid change of colour
Spare part LED light red/green/blue
Spare part LED light white
7
6
8
Pos 8 är bipackad lampan
Circuit diagram
Example 1: Lamp - effective output 28W
4
3
IN
230V AC
2
1
5
Example 2: Lamp - effective output 50W
IN
230V AC
6
ENGLISH
Circuit diagram for LED-lamps 28W
TR1 60W alt. 300W
L1
OUT
12V AC
N
8 1 Plastdistans
7 2 Skruv M6S M5x20
6 2 Knopp räfflad SR6127 typ 1
alt. alt.
5 2 Skruv MRX M4x10
4 1 Bygel till LED-lampa
3 1 LED lampa Spectravision 700, multi alt. vit
2 1 U-list PVC GV-1-5, L=550mm
1 1 Frontring
Item. Qty. Title/ Name
Surface treatment
E
The tolerance class in accordance with this
part of ISO 2768-1
Circuit diagram for LED-lamps Box 728, SE-194 27 Upplands Väsby, Sweden 50W
Phone +46 8 59411050, Fax +46 8 59086880
TR1 60W alt. 300W
L1
OUT
12V AC
N
alt. alt.
LA1
28W
LA2
A4
28W
POM
A4
EN 1.4404 (SS
PVC
LA3
EN 1.4404 (SS
28W
Materia
Assembly drawing n
Belysningsinsats ty
LA10
28W
LA1
50W
LA2
50W
LA3
50W
E10
2010-06-0
LA6
50W