Clearing Blockages; Battery Replacement - Dyson pure hot+cool HP01 Instrucciones De Seguridad

Clearing blockages

Unplug from the main power source. If the machine has been in use,
leave for 1 to 2 hours in order to allow the machine to cool down
completely. Look for blockages in the air inlet holes and in the small
aperture inside the air loop amplifier. Use a soft brush to remove debris.
Caution: hot when in use
This machine is hot when in use and for a short period after use.
Do not let bare skin touch hot surfaces. If children are present,
consider positioning the machine out of their reach.
12
Cleaning
Unplug from the main power source. If the machine has been
in use, leave for 1 to 2 hours before cleaning to allow the
cool completely. Dust may accumulate
machine to
surface of the machine. Wipe dust from the loop, filter unit and
other parts with a dry or damp cloth when dust accumulates.
Do not use detergents or polishes.

Battery replacement

Battery type CR 2032.
Unscrew the battery compartment on the remote control.
Loosen the base and pull to remove the battery.
on the