Dyson pure hot+cool HP01 Instrucciones De Seguridad página 13

Replacing the filter unit
1
When your non-washable filter unit needs replacing the machine will display the pattern shown.
To replace the non-washable filter unit, follow these steps. If the machine has been in use,
leave for 1 to 2 hours before replacing the filter unit to allow the machine to cool down completely.
Your Dyson machine is programmed to remind you to replace the filter unit after 12 months based
on 12 hours usage a day. Please note your indicator will activate sooner with more use.
The indicator is only a guide and you may need to replace the filter unit more regularly.
4
7
6 sec
2
5
A clockwise-rotating loading pattern
will be shown on the LED display.
When you have re-assembled your machine, press
and hold the 'Standby ON/OFF' button for 6 seconds
on the remote control to reset the filter indicator.
3
6
clik
Once the loading pattern is complete,
the machine will return to its normal usage.
clik
13